INVISIBLE WIPER
Invisible wiper is a two-component system that is applied to the windshield in order to impregnate it. The preparation forms a hydrophobic coating. When driving in the rain, the drops "slip" on the glass, which significantly improves visibility on the road without the use of mechanical wipers.In winter, the coating reduces the deposition of frost on the glass.The system consists of the activator of the glass surface and the "invisible" wipers".
Usage:
- Wash the glass thoroughly
- make sure that the surface of the pane is free of mineral deposits - if not, use RRC WSR LIQUID, or RRC WSR GEL. Finally, degrease the glass with IPC RRC.
- Wipe the surface of the glass with the applicator moistened with an activator and wipe off the excess with a paper towel.
- using the second applicator rub the invisible wiper in the glass surface, making the movements cross-ending with up-down motions.
- after application, use a heat source (infrared heater, heat gun, hair dryer) to thoroughly evaporate the excess solvent, and start polishing the glass. In order for the invisible wiper to achieve its maximum resistance and durability, repeat the application of the wiper again (without activator) and heat it. Make sure that the surface is completely dry before polishing.
- For best results, work at temperatures above 15 ° C.
Comments:
- before applying the preparation, make sure that the glass has been thoroughly cleaned.
- preparation ready for use - do not dilute.
- do not use inside the vehicle.
- the durability of the effect depends on such factors as: the right application; exposure of the pane surface to mechanical factors, including frequency of use of wipers; type and quality of used windshield washer fluid.
- If you can not work at temperatures above 15 degrees. You can leave the invisible wiper (before polishing) on the glass, eg at night.
English
Lietuvių kalba 
