Lietuvių kalba 
Quantity
Total
Product successfully added to your shopping cart
There are 1 items in your cart. There are 1 items in your cart.
Total (tax incl.) 13,96 €
English
Data sheet
| Make | Audi |
| Model | A3 8V |
| Type | 8V1 |
| Year | 2012-2020 |
| Engine | 1.0TFSI / 1.2TFSI / 1.4TFSI / 1.4TSI / 1.5TFSI / 1.8TFSI / 2.0TFSI / 1.6TDI / 2.0TDI |
| TÜV | yes |
| Max. axle load FA | -1080 kg |
| Max. axle load RA | -1110 kg |
| Lowering FA | 35 - 70 mm |
| Lowering RA | 35 - 70 mm |
| Series | Street |
More info
Aditional information:
torsion beam
Product Notes:
These lowering springs can only be used with shortened shock absorbers.
Front springs with last spring winding turned inwards.
Products dedicated strictly for the German market.
Not suitable for station wagons.
Not suitable for Diesel models.
Not suitable for 16V/20V/24V and RSI models.
Mounting instructions for W201/202/123/124/126: Max. lowerering is obtained by using single points (single stud) spring rubber bases on the front and rear axles. In case, the 3 point or 4 point rubber bases installed by the manufacturer have to be exchanged accordingly (spare part available from DB agents) in case of corresponding accessories, as automatic shifting, air conditioning etc. However on the front the 3 point or 4point rubber bases must always be used in case of trailer operation (trailer couping) on the rear axle, 3 point rubber basses must always be used.
torsion beam
Product Notes:
These lowering springs can only be used with shortened shock absorbers.
Front springs with last spring winding turned inwards.
Products dedicated strictly for the German market.
Not suitable for station wagons.
Not suitable for Diesel models.
Not suitable for 16V/20V/24V and RSI models.
Mounting instructions for W201/202/123/124/126: Max. lowerering is obtained by using single points (single stud) spring rubber bases on the front and rear axles. In case, the 3 point or 4 point rubber bases installed by the manufacturer have to be exchanged accordingly (spare part available from DB agents) in case of corresponding accessories, as automatic shifting, air conditioning etc. However on the front the 3 point or 4point rubber bases must always be used in case of trailer operation (trailer couping) on the rear axle, 3 point rubber basses must always be used.
