BMW 2 Series / F23 Cabriolet 2014- MTS Coilovers MTSGWBM24 Street

Product Notes:
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
8 - Not for 4x4.
9 - Only for vehicles without NIVO / factory pneumatic suspension.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35 - Rear thread adjustment block is mounted on the top.
39 - Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.