Replacement of the EGR VAG 2.5 TDI

Professionally made stainless steel replacement for EGR exhaust gas recirculation valve. TIG welded plate and planned to ensure perfect adhesion to the intake manifold.

At the end of the race pipe, a collar has been made to prevent the cord from slipping.

In addition, the kit includes an exhaust manifold plug laser cut from stainless steel and a cable tie.

turbo buffers faster at lower speed,

elimination of the problem of sticking with the carbon intake suction by damaged EGR

greater air flow

thanks to the use of stainless steel resistant to mechanical damage

high aesthetics of workmanship

VW LT 28-35 2.5 TDI APA 66 kW / 90 PS, 1999.05 - 2006.07

VW LT 28-46 2.5 TDI APA 66 kW / 90 PS, 1999.05 - 2006.07

VW LT 28-35 2.5 TDI, BBF 70 kW / 95 PS, 2001.05 - 2006.07

VW LT 28-35 2.5 TDI, BBF 70 kW / 95 PS, 2001.05 - 2006.07

VW LT 28-46 2.5 TDI, BBF 70 kW / 95 PS, 2001.05 - 2006.07

VW LT 28-35 2.5 TDI, BBE 61 kW / 83 PS, 2001.05 - 2006.07

VW LT 28-46 2.5 TDI, BBE 61 kW / 83 PS, 2001.05 - 2006.07

VW LT 28-35 2.5 TDI, ANJ, AVR, 80 kW / 109 PS, 1999.05 - 2006.07

VW LT 28-46 2.5 TDI, ANJ, AVR, 80 kW / 109 PS, 1999.05 - 2006.07

VW LT 28-35 2.5 TDI, AHD 75 kW / 102 PS, 1996.05 - 1999.08

VW LT 28-46 2.5 TDI, AHD 75 kW / 102 PS, 1996.05 - 1999.08

VW TRANSPORTER IV AHY, AXG, 111 kW / 151 PS, 1998.05 - 2003.04

VW TRANSPORTER IV AXG, 111 kW / 151 PS, 2000.09 - 2003.04

AUDI 074129463A

FISPA 83740

HOFFER 7518098

RHIAG 104607

SIDAT 83740

VAG 074129463A

VW 074129463A

OTHER VARIANTS OF THE OFFERED PART WERE COVERED IN THE CARS

BY PURCHASE, YOU WILL CONFIRM THAT THE PART FITS IN YOUR CAR

Replacement installation on models where the EGR valve has an electrical plug requires intervention in the control program. Without removing the valve programmatically, the assembly will cause the "CHECK ENGINE" engine error to appear